I did contact the manufacturer and because of the cutouts, the lane departure and vehicle blind spot detection functions will not be affected. The Longview Custom Towing Mirrors # LO54FR that will not cover up your factory cameras. They have a cut out on the bottom side of the towing mirror to accommodate both the puddle lamps and the camera on the bottom of your mirror. view full answer...
Yes, they can be adjusted to face in. The purpose of the Longview Custom Towing Mirrors item # LO54FR is that it allows you to see your blind spots on both sides while towing. The only way you'll be able to see your trailer's wheels when backing is if you manually tilt the mirror to face your trailer not to see your blind spot.
I have linked a video below that does a decent job showing you what your vision will be looking back into these mirrors. The video shows them set up to see your... view full answer...
After reaching out to the manufacturer The Blind Spot Monitoring System # CU95XR sensor dimensions are 4-1/2 inches x 3 inches x 1-1/2 inches.
I will attach a review video link below of the Blind Spot Monitoring System. view full answer...
The sensors in the Blind Spot Monitoring System for RVs # CU62XR have a height of 7.04" and a width of 4.84". I was able to verify this with the manufacturer and have included a diagram that shows these measurements. view full answer...
The K-Source Blind Spot Mirror # KSCL045 will clamp on to tubing that has an outer diameter of 1/2-inch. I went to our warehouse and measured this bracket to confirm. view full answer...
I went and pulled the K-Source Custom Blind Spot Mirrors # KSCW1009 from our warehouse to get the dimension of them and found that the tall side of the mirror is 1-3/4 inches in height, the shorter side is 1-1/2 inches tall and the overall width is 3 inches. view full answer...
I spoke with my contact over at K-Source about the custom blind spot mirrors, # KSCW1100. They are 1-3/4 inches tall and 2-7/8 inches wide. They are designed to fit the following:
2007 - 2013 Chevrolet Avalanche
2007 - 2014 Cadillac Escalade
2008 - 2013 GMC Sierra
2014 - 2014 GMC Sierra 2500
2008 - 2013 Chevrolet Silverado
2014 - 2014 Chevrolet Silverado 2500
2007 - 2007 Chevrolet Silverado New Body
2007 - 2014 Chevrolet Suburban
2007 - 2014 Chevrolet Tahoe
2007 - 2014 GMC Yukon... view full answer...
According to my research, the sensors for the Ford BLIS aren't located in the mirror, so there won't be a problem. The # KS81850 Snap & Zap mirror won't cover the display mounted in the mirror glass, so everything will still work the way you're used to. If you use the provide video link, you can see how the mirrors snap in place over the factory mirror. view full answer...
I spoke to my contact at Rampage and he said they do not have an exact viewing angle for the Rampage Camera part # RA7710 that you referenced. He said it's not a super wide angle so it wouldn't be wide enough to use as a blind spot eliminator but it will display what's behind you. The best I can do is have you check out the pictures of the display that I attached and the review video we did for the setup to give you an idea what the angle would be. view full answer...
The main mirror on the passenger side of the K-Source Custom Expandable Towing Mirrors, # KS61203-04F, is flat like the mirror on the driver side.
This set of mirrors is designed to fit 2009-2014 Ford Van with non-heated power mirrors. Both mirrors has the ability to telescope to help see when towing a trailer. The bottom mirror will be your spotter mirror. This mirror is designed to help increase you rear vision by reducing your blind spot. view full answer...
The K-Source Custom Extendable Towing MIrrors # KS61201-02F referenced in your question, which are confirmed to fit your 2010 Ford Van, feature an extended length of 20-1/2 inches from the edges of the mirrors to the vehicle. When retracted they measure 17-1/2 inches long.
These are really nice, telescoping mirrors that will provide you with an extended view so that you can easily see around the sides of your trailer. The built-in spotter mirrors will also reduce blind spots. Both the... view full answer...